安静的区域

The FRA Train Horn Rule (49 CFR 222) requires a train operator to sound the horn under various circumstances including when a train is approaching and passing through a grade crossing. According to FRA rules, train horns must:

• Be within 96 and 110 decibels, a sound level equivalent to that of a lawnmower
• Be sounded at least 15 seconds but no more than 20 seconds before reaching a crossing
• Be sounded no more than a quarter of a mile from a crossing if the train is traveling faster than 60 mph
• Be sounded approaching persons on or near the track
• Be sounded in a standardized pattern of 2 long, 1短1长, which must be repeated or be prolonged until the lead cab car occupies the grade crossing

The following safety measures alert drivers and pedestrians to the presence of railroad tracks and help guide and regulate traffic when a train is approaching:

• Audible and visual warnings, like bells and flashing red lights
• Safety signage indicates where vehicles and pedestrians should stop
• Gate arms and/or medians block lanes in both directions to prevent vehicles from driving around the lowered gates to cross the tracks
• Pedestrian gate arms or pull swing gates at each intersection alert pedestrians that a train is approaching
• Chain link fencing along the sidewalk channel pedestrians to the correct crossing area
• All crossings are compliant with the Americans with Disabilities Act (ADA)

是我们的 安全伙伴 when traveling through quiet zones by doing the following:

司机

• 准备在铁路交叉路口停车
• Understand and follow the crossing signs and warning devices
• Do not proceed until the gate arms have fully risen
• Pedestrian gate arms or pull swing gates at each intersection alert pedestrians that a train is approaching
• 不要与火车赛跑或在铁轨上停车

行人

• 保持警惕，不要分心
• Stop, look and listen for approaching trains
• Follow all rail crossing signs and instructions
• Cross only at designated pedestrian or roadway crossings

Many circumstances exist that require the use of train horns for safety purposes and based on federal regulations, 包括:

• 工作人员在轨道上或轨道附近
• An animal, pedestrian or vehicle has the potential affect train travel through a crossing
• An emergency is believed to exist or could exist
• A train is backing up or resuming operations after having stopped anywhere on the alignment (commuter and freight trains)
• Routine software maintenance or repairs are occurring
• 门臂定时有问题, 货运列车运营, Train Management Dispatch Systems (TMDS) or Positive Train Control (PTC)

Positive Train Control (PTC) is a safety protection system that monitors and controls train movements to prevent train-to-train collisions, 超速脱轨, incursions into established work zone limits and movement of a trains through a misaligned switch. PTC will signal the operator to slow or stop the train if a hazard exists. If there is no response after eight seconds, the train will automatically slow or stop. RTD is the first transit agency in the nation to have wireless crossings joined to PTC.

RTD is committed to notifying communities about the expected timeframe for the use of train horns before planned work or maintenance that requires horns to blow. 当不可预见的情况发生时, RTD will notify communities about why horns are in use and when we expect them stop as soon as we are alerted of an ongoing issue. Issues will be resolved as quickly as possible to minimize the public impact.

If there are questions or concerns about train horn usage, residents may contact RTD Customer Care 在线 或者拨打303-299-6000. Information may not be available for every instance of train horn usage. Our Customer Care staff will make every best effort to respond to questions with the information available at the time. Staff may report certain incidents to the commuter rail operations for review and action as appropriate.